Mini Table Saw, Grinder Polishing Machine, Multifunction Lapidary Saw, Jewelry Polishing Machine, Bench Saw Household for DIY Woodworking Handmade Tool

Price: [price_with_discount]
(as of [price_update_date] – Details)

[ad_1]
Application

It is suitable for carving, polishing, and drilling of jade, agate, metal, wood, etc. It is also suitable for manual polishing, grinding, and cutting of beads, bodhi, and various diy materials.

Specifications

Speed: 800-10000rpm

Blade size: 15cm/6in

Plug: Us-standard

Flexible shaft clamp size: 4mm/0.157in

Drill chuck range: 1.5-10mm/0.06-0.4in

Cutting depth: 38mm/1.5in

Power cord length: About 1.5m/4.92ft

Installation required: Yes

Table size(l*w): 26.5*22cm/10.43*8.66in

Notes

1. Please note this tool should be grounded while in use.

2. Please always wear proper eye and face protection devices such as safety glasses and face shields(not included). Please do not wear loose clothing or jewelry. Please tie back your long hair.

3. Before use, please check each attachment for cracks or defects, and do not use any damaged, loose, vibrating or unbalanced accessories, or any attachments that are higher than the maximum rated speed of the machine.

4. Please always insert the shank or arbor of an accessory or mandrel into the collect(or collet holder chuck or chuck arbor) as far as possible to provide proper support. Please tighten the collet or chuck securely.

5. Please do not use excessive side pressures which may tend to bend or break the shank or arbor or an accessory. Let the speed of the accessory do the work.

6. Please do not install the motor by jamming or using excessive pressure on the polishing wheel, buff, wheel, or other accessories. This can result in damage to the motor.

7. Please do not operate your power tool during a perceptible power decreases. Please turn the power tool off and do not use it until power is fully restored.

8. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

【High stability】The aluminum base with rubber feet can effectively alleviate vibration and avoid scratching the countertop. The mounting holes and angle brackets allow for further fixation on the workbench, which helps to mitigate the potential damage caused by vibration to items to be cut or polished.
【Safe to use】The main switch and saw blade are protected by an outer shell, which not only prevents dust and water from entering critical components but also effectively prevents accidents. The overheating protection function makes the machine less susceptible to overheating. The sink can effectively cool the machine, making your work safer.
【Complete accessories】The complete installation accessories such as carbon brushes, chuck&handle keys, grinding wheel&saw blade connecting rods, and practical tools needed during work such as fiber wheel and flexible shaft save you cost and time without additional tedious purchases. You can use flat head screws to unscrew the carbon brush cover and replace the carbon brush, extending its service life.
【Flexible angle ruler】Its operating table is equipped with a prominent yellow angle ruler, which can not only adjust the angle of the material to make your work more precise but also be used to push the material without touching the saw blade, making it safer. The drill chuck has a precise clamping range(0.06-0.4″), making it suitable for polishing more items of different sizes while reducing deviation to the maximum extent.

[ad_2]